It has been reported that certain OEM IT equipment manufacturer’s sales representatives have told customers (which could be an end user, reseller or integrator) that if the customer uses third party cable in the system manufacturer’s module, the system manufacturer’s warranty is voided. Through this ploy, the sales representative attempts to coerce customers into purchasing cabling from the system manufacturer or their approved cabling manufacturers, usually at much higher prices than Unirise charges. A module manufacturer may resort to this type of warranty threat to spread fear, uncertainty and doubt in the minds of consumers, rather than to compete on the basis of quality and price (“FUD marketing”).
In legal terms, this type of ploy is referred to as a “tie-in sales provision.” In general, such provisions are illegal. They are specifically prohibited in the consumer market by section 102(c) of the Magnuson-Moss Warranty Act of 1975 (15 United States Code section 2302(c)). In the workstation and server markets, such ploys can violate sections 1 and 2 of the Sherman Antitrust Act (15 United States Code sections 1 and 2). As the United States Supreme Court has stated:
“The essential characteristic of an invalid tying arrangement lies in the seller’s exploitation of its control over the tying product [here, the computer system] to force the buyer into the purchase of a tied product [here, the memory module sold by the system manufacturer] that the buyer either did not want at all, or might have preferred to purchase elsewhere on different terms. When such “forcing” is present, competition on the merits in the market for the [memory module] is restrained and the Sherman Act is violated.”
Jefferson Parish Hospital District No. 2 v. Hyde, 466 U.S. 2 (1984).
Companies and individuals that violate the antitrust laws are subject to a wide range of sanctions, including having triple damages imposed against them. The important point is that, regardless of their legality, these types of sales ploys are intended to intimidate and pressure unsophisticated purchasers into spending substantially more than they should for cabling.
Unirise strongly supports customer choice and believes that consumers – whether end user, reseller, or systems integrator – should be free to purchase compatible cabling without being subject to threats and misinformation. Throughout its existence, Unirise has placed extreme importance on reliability. Unirise cables are designed to meet the specific requirements of the system or class of systems into which the cable will be installed. Our cables are 100% tested to be reliable and compatible. Further, all Unirise cables are backed by a lifetime warranty and supported by free technical support.
What is the Magnuson-Moss Act?
The Federal Trade Commission Magnuson-Moss Act protects consumers. This act, passed in 1975, states that tie-in sales provisions are NOT allowed in consumer warranties. Manufacturers cannot require consumers to purchase items or services in order to keep their warranty valid.
Essentially, the act states that a warrantor cannot require the consumer of their product (a server or module) to buy an additional product or service (OEM Cabling) to be used with the original product in order to maintain the original product warranty.
In other words, you cannot be required to add the OEM manufacturer’s cabling to maintain the warranty on the system. Also, the manufacturer cannot state that the system warranty is void if other “brands” of peripherals are used.
If you purchased ABC Switches but chose to use XYZ brand cabling, ABC Company cannot void the warranty or refuse to provide service on your ABC Switches.
In addition to the Magnuson-Moss Act any manufacturer that conditions its warranty on purchases of its own equipment may violate the antitrust laws.
Will Unirise cabling void my equipment warranty?
If you wanted to put a Duracell® battery into a Sony® stereo would it void the warranty on the stereo? Or, what if you wanted to install a Kenwood® stereo into your Nissan Maxima®, would it void the warranty on your car? NO!
What if I have an existing service contract with a system OEM but I want to purchase Unirise cabling?
No problem! You can install the cabling yourself. In fact our ClearFit cabling is specifically designed for quick and easy installation due to its ultra flexing No Kink cabling design. It makes it easy to get into those hard to reach areas.
What if I am currently negotiating a service contract and the OEM tells me I cannot use third party cabling?
You are the customer! The OEM will not want to lose the sale over the cabling installation. As a customer you have the right to choose how you would like your service contract fulfilled.
There are several Unirise customers who have standardized on a specific OEM for their servers and systems and have included Unirise cabling on their standards list.
Understanding the Magnuson-Moss Warranty Act
The Magnuson-Moss Warranty Act is the federal law that governs consumer product warranties. Passed by Congress in 1975, the Act requires manufacturers and sellers of consumer products to provide consumers with detailed information about warranty coverage. In addition, it affects both the rights of consumers and the obligations of warrantors under written warranties.
To understand the Act, it is useful to be aware of Congress’ intentions in passing it. First, Congress wanted to ensure that consumers could get complete information about warranty terms and conditions. By providing consumers with a way of learning what warranty coverage is offered on a product before they buy, the Act gives consumers a way to know what to expect if something goes wrong, and thus helps to increase customer satisfaction.
Second, Congress wanted to ensure that consumers could compare warranty coverage before buying. By comparing, consumers can choose a product with the best combination of price, features, and warranty coverage to meet their individual needs.
Third, Congress intended to promote competition on the basis of warranty coverage. By assuring that consumers can get warranty information, the Act encourages sales promotion on the basis of warranty coverage and competition among companies to meet consumer preferences through various levels of warranty coverage.
Finally, Congress wanted to strengthen existing incentives for companies to perform their warranty obligations in a timely and thorough manner and to resolve any disputes with a minimum of delay and expense to consumers. Thus, the Act makes it easier for consumers to pursue a remedy for breach of warranty in the courts, but it also creates a framework for companies to set up procedures for resolving disputes inexpensively and informally, without litigation.
What the Magnuson-Moss Act Does Not Require
In order to understand how the Act affects you as a businessperson, it is important first to understand what the Act does not require.
First, the Act does not require any business to provide a written warranty. The Act allows businesses to determine whether to warrant their products in writing. However, once a business decides to offer a written warranty on a consumer product, it must comply with the Act.
Second, the Act does not apply to oral warranties. Only written warranties are covered.
Third, the Act does not apply to warranties on services. Only warranties on goods are covered. However, if your warranty covers both the parts provided for a repair and the workmanship in making that repair, the Act does apply to you.
Finally, the Act does not apply to warranties on products sold for resale or for commercial purposes. The Act covers only warranties on consumer products. This means that only warranties on tangible property normally used for personal, family, or household purposes are covered. (This includes property attached to or installed on real property.) Note that applicability of the Act to a particular product does not, however, depend upon how an individual buyer will use it.
The following section of this manual summarizes what the Magnuson-Moss Warranty Act requires warrantors to do, what it prohibits them from doing, and how it affects warranty disputes.
What the Magnuson-Moss Act Requires
In passing the Magnuson-Moss Warranty Act, Congress specified a number of requirements that warrantors must meet. Congress also directed the FTC to adopt rules to cover other requirements. The FTC adopted three Rules under the Act, the Rule on Disclosure of Written Consumer Product Warranty Terms and Conditions (the Disclosure Rule), the Rule on Pre-Sale Availability of Written Warranty Terms (the Pre-Sale Availability Rule), and the Rule on Informal Dispute Settlement Procedures (the Dispute Resolution Rule). In addition, the FTC has issued an interpretive rule that clarifies certain terms and explains some of the provisions of the Act. This section summarizes all the requirements under the Act and the Rules.
The Act and the Rules establish three basic requirements that may apply to you, either as a warrantor or a seller.
- As a warrantor, you must designate, or title, your written warranty as either “full” or “limited”
- As a warrantor, you must state certain specified information about the coverage of your warranty in a single, clear, and easy-to read document.
- As a warrantor or a seller, you must ensure that warranties are available where your warranted consumer products are sold so that consumers can read them before buying.
The titling requirement, established by the Act, applies to all written warranties on consumer products costing more than $10. However, the disclosure and pre-sale availability requirements, established by FTC Rules, apply to all written warranties on consumer products costing more than $15. Each of these three general requirements is explained in greater detail in the following chapters.
What the Magnuson-Moss Act Does Not Allow
There are three prohibitions under the Magnuson-Moss Act. They involve implied warranties, so-called “tie-in sales” provisions, and deceptive or misleading warranty terms.
Disclaimer or Modification of Implied Warranties
The Act prohibits anyone who offers a written warranty from disclaiming or modifying implied warranties. This means that no matter how broad or narrow your written warranty is, your customers always will receive the basic protection of the implied warranty of merchantability. This is explained in Understanding Warranties.
There is one permissible modification of implied warranties, however. If you offer a “limited” written warranty, the law allows you to include a provision that restricts the duration of implied warranties to the duration of your limited warranty. For example, if you offer a two-year limited warranty, you can limit implied warranties to two years. However, if you offer a “full” written warranty, you cannot limit the duration of implied warranties. This matter is explained in Titling Written Warranties as “Full” or “Limited”.
You sell a consumer product with a written warranty from the product manufacturer, but you do not warrant the product in writing, you can disclaim your implied warranties. (These are the implied warranties under which the seller, not the manufacturer, would otherwise be responsible.) But, regardless of whether you warrant the products you sell, as a seller, you must give your customers copies of any written warranties from product manufacturers.
“Tie-In Sales” Provisions
Generally, tie-in sales provisions are not allowed. Such a provision would require a purchaser of the warranted product to buy an item or service from a particular company to use with the warranted product in order to be eligible to receive a remedy under the warranty. The following are examples of prohibited tie-in sales provisions.
In order to keep your new Plenum Brand Vacuum Cleaner warranty in effect, you must use genuine Plenum Brand Filter Bags. Failure to have scheduled maintenance performed, at your expense, by the Great American Maintenance Company, Inc., voids this warranty.
While you cannot use a tie-in sales provision, your warranty need not cover use of replacement parts, repairs, or maintenance that is inappropriate for your product. The following is an example of a permissible provision that excludes coverage of such things.
While necessary maintenance or repairs on your AudioMundo Stereo System can be performed by any company, we recommend that you use only authorized AudioMundo dealers. Improper or incorrectly performed maintenance or repair voids this warranty.
Although tie-in sales provisions generally are not allowed, you can include such a provision in your warranty if you can demonstrate to the satisfaction of the FTC that your product will not work properly without a specified item or service. If you believe that this is the case, you should contact the warranty staff of the FTC’s Bureau of Consumer Protection for information on how to apply for a waiver of the tie-in sales prohibition.
Deceptive Warranty Terms
Obviously, warranties must not contain deceptive or misleading terms. You cannot offer a warranty that appears to provide coverage but, in fact, provides none. For example, a warranty covering only “moving parts” on an electronic product that has no moving parts would be deceptive and unlawful. Similarly, a warranty that promised service that the warrantor had no intention of providing or could not provide would be deceptive and unlawful.
How the Magnuson-Moss Act May Affect Warranty Disputes
Two other features of the Magnuson-Moss Warranty Act are also important to warrantors. First, the Act makes it easier for consumers to take an unresolved warranty problem to court. Second, it encourages companies to use a less formal, and therefore less costly, alternative to legal proceedings. Such alternatives, known as dispute resolution mechanisms, often can be used to settle warranty complaints before they reach litigation.
The Act makes it easier for purchasers to sue for breach of warranty by making breach of warranty a violation of federal law, and by allowing consumers to recover court costs and reasonable attorneys’ fees. This means that if you lose a lawsuit for breach of either a written or an implied warranty, you may have to pay the customer’s costs for bringing the suit, including lawyer’s fees.
Because of the stringent federal jurisdictional requirements under the Act, most Magnuson-Moss lawsuits are brought in state court. However, major cases involving many consumers can be brought in federal court as class action suits under the Act.
The consumer lawsuit provisions may have little effect on your warranty or your business, they are important to remember if you are involved in warranty disputes.
Alternatives to Consumer Lawsuits
Although the Act makes consumer lawsuits for breach of warranty easier to bring, its goal is not to promote more warranty litigation. On the contrary, the Act encourages companies to use informal dispute resolution mechanisms to settle warranty disputes with their customers. Basically, an informal dispute resolution mechanism is a system that works to resolve warranty problems that are at a stalemate. Such a mechanism may be run by an impartial third party, such as the Better Business Bureau, or by company employees whose only job is to administer the informal dispute resolution system. The impartial third party uses conciliation, mediation, or arbitration to settle warranty disputes.
The Act allows warranties to include a provision that requires customers to try to resolve warranty disputes by means of the informal dispute resolution mechanism before going to court. (This provision applies only to cases based upon the Magnuson-Moss Act.) If you include such a requirement in your warranty, your dispute resolution mechanism must meet the requirements stated in the FTC’s Rule on Informal Dispute Settlement Procedures (the Dispute Resolution Rule). Briefly, the Rule requires that a mechanism must:
- Be adequately funded and staffed to resolve all disputes quickly;
- Be available free of charge to consumers;
- Be able to settle disputes independently, without influence from the parties involved;
- Follow written procedures;
- Inform both parties when it receives notice of a dispute;
- Gather, investigate, and organize all information necessary to decide each dispute fairly and quickly;
- Provide each party an opportunity to present its side, to submit supporting materials, and to rebut points made by the other
- party; (the mechanism may allow oral presentations, but only if both parties agree);
- Inform both parties of the decision and the reasons supporting it within 40 days of receiving notice of a dispute;
- Issue decisions that are not binding; either party must be free to take the dispute to court if dissatisfied with the decision (however, companies may, and often do, agree to be bound by the decision);
- Keep complete records on all disputes; and
- Be audited annually for compliance with the Rule.
It is clear from these standards that informal dispute resolution mechanisms under the Dispute Resolution Rule are not “informal” in the sense of being unstructured. Rather, they are informal because they do not involve the technical rules of evidence, procedure, and precedents that a court of law must use.
Currently, the FTC’s staff is evaluating the Dispute Resolution Rule to determine if informal dispute resolution mechanisms can be made simpler and easier to use. To obtain more information about this review, contact the FTC’s warranty staff.
As stated previously, you do not have to comply with the Dispute Resolution Rule if you do not require consumers to use a mechanism before bringing suit under the Magnuson-Moss Act. You may want to consider establishing a mechanism that will make settling warranty disputes easier, even though it may not meet the standards of the Dispute Resolution Rule.